Tungsten Copper W90 Block

tungsten copper W90 block


Tungsten copper W90 block is composed of 90% W and 10% Cu, its density is up to 16.75g/cm3, hardness reaches more than HB260, the bending strength is 1160MPa, the conductivity is 27%IACS and the softening temperature is more than 900℃.


Owing to W takes up the most of parts, tungsten copper W90 block is hard, but its toughness and ductility is not so good so that it is not suitable for bending and drawing with large angle.


Since 1990s, tungsten copper has been used as new material for electronic packaging and heat sink. At present, we can see tungsten copper everywhere, such as CPU of computer, large scale intergrated circuit, high-power microwave devices and some radiators.

Specifications (mm)

D1×100×100 D2×100×100 D3×100×100 D4×100×100 D5×100×100
D6×100×100 D7×100×100 D8×100×100 D9×100×100 D10×100×100
D12×100×100 D15×100×100 D16×100×100 D18×100×100 D20×100×100
D22×100×100 D25×100×100 D30×100×100 D35×100×100 D40×100×100
D45×100×100 D5×100×200 D6×100×200 D8×100×200 D10×100×200
D12×100×200 D15×100×200 D20×100×200 D25×100×200 D30×100×200
The standard length and width of tungsten copper block we are able to provide is less than 300mm, and the thickness is more than 0.1mm (±0.05mm), customized sizes and tolerances are also accepted.

More information about other grades or properties, please visit: Traditional Grade

Inquiry & Order